Pikto Sensoren
CAN Ignition Control

CAN Ignition Control is the electronical ignition lock out-of-the-box. It can be used in a wide range of application, from construction equipment or service vehicles of all types in municipal or agricultural sectors to stationary motors or operating machines.
It can be configured by the vehicle manufacturer, thus project costs and long project times can be totally eliminated. CAN Ignition Control is an effective and low-priced possibility to avoid unauthorized start-up of vehicles and machines.

For more information, check out the product sheet:

Contact Us for Your CAN Ignition Control Product Requirements!

Experience the out-of-the-box electronic ignition solution with CAN Ignition Control. With direct configurability by the vehicle manufacturer, it eliminates high project costs and long project timelines. Contact us now to discuss your specific requirements and get the effective and cost-efficient solution to prevent unauthorized vehicle and machinery operation!

The CAN Ignition Control communicates via CAN (2.0B). Programming can be carried out by the manufacturer, as well as by the user with a Peak-CAN-Adapter.

The identification of authorised drivers is effected by ignition lock. As a data medium it also saves different vehicle data, e.g. engine hours and can be readout via PC.

A programmable transponder which is integrated in the key enables the digital storage.

– pair key
– reset key
– reset all keys
– write data on the corresponding address in
the transponder (only action)
– change baud rate
– standard / extended ID
– receiver’s serial number
– transmission rate
– ID for CAN-message
– Transmission data by valid key

Voltage range: 7 – 60 V
Nominal voltage: 12 V / 24 V / 48 V
Temperature range: -40 °C up to +85 °C
Current consumption antenna active: typ. 80 mA
Current consumption antenna inactive: typ. 25 mA
Stand-by current (clamp 30): max. 15 μA (Kl. 15 Aus)
Control cable: 5 pin. Super-Seal (manufacturer: Tyco)
CAN-bus interface: CAN 2.0B
CANp-bus speed: switchable 250 kbit/s, 500 kbit/s, 1Mbit/s

Services
– read transponder
– query of the status (only action)
– parameter request
– query of the operating time counter

Housing
Plastic housing

Installation
CAN Ignition Control can be installed behind a plastic dashboard with or without ignition lock.